Mon–Fri 7:00–15:00
ES EN
Custom stone

Custom porcelain countertops

We make and install custom porcelain countertops in Córdoba and the Costa del Sol: the surface most resistant to scratches, heat and stains, with no sealing, from brands such as DEKTON, LAMINAM, COVERLAM or Techlam, among many others. We cut and edge every piece in our workshop in Puente Genil.

Free study and quote — we advise you before you decide.

100%made to measure
Ownworkshop in Puente Genil
5,0★Google reviews
Installwe fit it ourselves
Technical data

Porcelain as a countertop

What it is
A ceramic material sintered at very high pressure and temperature, producing an ultra-compact surface.
Scratches
Extreme surface hardness: the most scratch-resistant of all.
Heat & sun
Very high resistance to heat and UV. Suitable outdoors.
Stains
Non-porous: resistant to stains and acids. No sealing needed.
Thicknesses
12 and 20 mm. 20 mm costs more, and a thick edge is made with a reinforced mitre.
Finishes
Marble, stone, concrete or wood looks; matt, silk, polished or textured.
Weak point
Edges and mitre joints under a hard knock, and repairs, which are complex.
Manufacture
Made to measure in our workshop in Puente Genil (Córdoba), fitted by our own team.

Every countertop is cut to the size of your kitchen. Send us a plan or the measurements and we will confirm which models and thicknesses fit.

Premium finish · Optional

Continuous veining across joints

If your countertop has joints, we can fill them with special fillers and tints that carry the vein from one piece to the next, and lay it out as a bookmatch where the model allows. For anyone who wants the countertop to read as one piece.

Already have a porcelain countertop?

Chipped an edge or a corner?

We repair chipped edges and corners on matt-finish porcelain countertops at your home, whatever the brand and without removing them. Send us two photos and we will tell you whether it can be fixed.

Recent work

Projects we have completed

See this type of work by material:

Before you decide

What to know before choosing porcelain

Porcelain is the most all-round countertop available today: it does not scratch, stain or mind heat. But it is a demanding material to fabricate, and there are things worth knowing before choosing a model.

  1. 12 or 20 mm

    12 mm is the most common: light, with more models to choose from and a thin, very current edge. 20 mm gives the piece more body, but costs more. If you want the look of a thick countertop, it can also be done in 12 mm with a reinforced mitred edge.

  2. The veining does not always go through

    On many porcelains the pattern is on the face, not through the thickness: on the edge or around the sink cut-out you see the body colour. Some models have through-veining, but in 12 mm the choice is smaller and they cost more. We show you how each model looks on the edge before you choose.

  3. A marble or wood look, without the drawbacks

    It is the way to have the look of marble in the kitchen without lemon or vinegar marking it, or the look of wood without water spoiling it. That is why it is what we recommend to anyone who falls for marble in an everyday kitchen.

  4. What we will not sell you as an advantage

    The edges. The surface is extremely hard, but a corner or a mitre can chip with a sharp knock from a cast-iron pan, and a repair in porcelain is complex and usually shows. Slightly rounding exposed arrises helps a lot; we suggest it when designing the countertop.

Materials

A selection from our catalogue

How we work

From the first call to installation

1

Advice & measuring

We listen to your project and take exact measurements.

2

Design & quote

We propose materials, finishes and edges, with a clear quote.

3

Workshop fabrication

We craft each piece to measure in our own workshop.

4

Installation

We install with precision and leave everything ready.

By material

Countertops by material

FAQ

Frequently asked questions

How much does a porcelain countertop cost?
It depends on the model and brand, the thickness (20 mm costs more than 12 mm), the finish (polished or textured costs more than matt or silk), the edge — a thick mitred edge adds work — and the length and cut-outs of the countertop. That is why we do not quote per square metre: we give you a fixed quote from your measurements, with no commitment.
Which porcelain brands do you work with? Do you do Dekton?
Yes. We work with large-format porcelain from the leading brands: DEKTON, LAMINAM, COVERLAM, Techlam, Atlas, BLAKER, ARKLAM, ASCALE, IKOM, LITHOTECH, VENUX or CUPASTONE, among others. We show you the models available in the thickness and finish you need.
Is there wood-look or marble-look porcelain for countertops?
Yes, and it is one of its great advantages: there are finishes that imitate marble, stone, concrete or wood, with the toughness of porcelain. It is the option we recommend to anyone who wants the look of marble in an everyday kitchen. Watch the veining: on many models it is only on the face, so we show you how the edge looks before you choose.
Can it go outdoors?
Yes. It resists heat and UV without losing colour, so it is one of the best options for terrace kitchens and barbecue areas.
Why does it matter so much who installs it?
Because porcelain is unforgiving. It is very hard on the surface, but fragile at edges and joints if it is cut or supported badly. It needs specific machinery, reinforcement on overhangs and islands and very careful fitting. We cut it in our workshop and install it with our own team.
How do I request a quote?
Through the countertop advisor, via WhatsApp or on the contact page, with the measurements or a plan of the kitchen and, if you have one, the model and thickness you like.

Not sure which to choose?

Use our free advisor or ask us directly.

0