In a countertop made of several pieces, the joint is usually a single colour that cuts across the veining. With continuous veining we fill it with special fillers and tints and carry the vein across the joint, so the countertop reads as one piece. An optional finish for the most detail-minded, on the porcelain countertops we make in Córdoba and the Costa del Sol.
Continuous veining is decided before the first cut: ask for it when you request a quote.
Tell us the model you like and the shape of your kitchen, and we will tell you where the joints would fall and whether it allows bookmatch.
See this type of work by material:
Any countertop of a certain size has joints: slabs have a maximum size and an L-shaped kitchen or a large island cannot come out of a single piece. The question is how those joints are finished.
It is filled with a single-colour filler, the one closest to the porcelain background. It is correct and standard, but on a boldly veined model the joint line cuts the pattern and you can see where one piece ends and the next begins.
The joint is filled with the background colour and the vein that comes from one piece and continues into the next is then drawn by hand on top, with special tints. It is detailed work, joint by joint, which is why it is a separate finish and not the standard.
Where the countertop turns down into the apron, the side panel or the waterfall of an island, the vein has to wrap around the arris. Even when the layout is planned for it, the vein almost never meets to the millimetre along the mitre line, and that is exactly where people look. That is where continuous veining finishes the corner, so the vein seems to fold with the piece instead of breaking.
If the manufacturer sells that model as consecutive slabs for bookmatching, the veins on the two pieces already match as a mirror image and continuous veining finishes the joint. Not every model offers it: we confirm it for the specific model.
That the joint disappears. At normal distance the countertop reads as one piece; looking from a hand’s width away under raking light, you can still tell there is a joint. And on a plain model it is not worth paying for: a good same-colour joint already does the job.
We choose where the joints fall so the vein crosses them at the best point, not wherever is easiest to cut.
We cut the pieces in the workshop following that layout and, where the model allows, as a bookmatch.
We install the countertop with the joints as tight as possible.
With the pieces in place, we fill the joint with the background colour and draw the vein across it with special tints.
Tell us the porcelain model and the shape of your kitchen, and we will quote it with and without this finish.