We make and install custom porcelain countertops in Córdoba and the Costa del Sol: the surface most resistant to scratches, heat and stains, with no sealing, from brands such as DEKTON, LAMINAM, COVERLAM or Techlam, among many others. We cut and edge every piece in our workshop in Puente Genil.
Free study and quote — we advise you before you decide.
Every countertop is cut to the size of your kitchen. Send us a plan or the measurements and we will confirm which models and thicknesses fit.
If your countertop has joints, we can fill them with special fillers and tints that carry the vein from one piece to the next, and lay it out as a bookmatch where the model allows. For anyone who wants the countertop to read as one piece.
We repair chipped edges and corners on matt-finish porcelain countertops at your home, whatever the brand and without removing them. Send us two photos and we will tell you whether it can be fixed.
See this type of work by material:
Porcelain is the most all-round countertop available today: it does not scratch, stain or mind heat. But it is a demanding material to fabricate, and there are things worth knowing before choosing a model.
12 mm is the most common: light, with more models to choose from and a thin, very current edge. 20 mm gives the piece more body, but costs more. If you want the look of a thick countertop, it can also be done in 12 mm with a reinforced mitred edge.
On many porcelains the pattern is on the face, not through the thickness: on the edge or around the sink cut-out you see the body colour. Some models have through-veining, but in 12 mm the choice is smaller and they cost more. We show you how each model looks on the edge before you choose.
It is the way to have the look of marble in the kitchen without lemon or vinegar marking it, or the look of wood without water spoiling it. That is why it is what we recommend to anyone who falls for marble in an everyday kitchen.
The edges. The surface is extremely hard, but a corner or a mitre can chip with a sharp knock from a cast-iron pan, and a repair in porcelain is complex and usually shows. Slightly rounding exposed arrises helps a lot; we suggest it when designing the countertop.
We listen to your project and take exact measurements.
We propose materials, finishes and edges, with a clear quote.
We craft each piece to measure in our own workshop.
We install with precision and leave everything ready.
Use our free advisor or ask us directly.